Steamboat Springs Log Home Restoration: Barn Gray & Stone
Colorado field journal / Summer 2026
The change is in the whole wall: dark, uneven logs become a coordinated Barn Gray exterior, with light Stone chinking drawing out every course.
Log Home Finishing LLC completed this surface restoration, staining, and chinking project in Steamboat Springs, in Routt County, Colorado, during Summer 2026. The starting point was a failing coating and uneven weathering. The goal was a sound, prepared surface, a coordinated gray finish, and sealed joints—not simply a darker layer over the existing wear.
- Setting
- Steamboat Springs, CO
- Season
- Summer 2026
- Log color
- Barn Gray #872
- Joint color
- Stone #211
01 / Before
Start with what the wall is telling you.
The older coating gives the gable elevation a dark, uneven appearance. The video adds closer evidence of peeling and open checks. These observations explain why preparation mattered; they do not identify the old coating’s chemistry or establish the condition inside a log. This documented scope is surface restoration and joint sealing, not a record of log replacement or structural repair.
01 / Before · Gable
02 / During
The quiet work beneath the color.
Protection and masking came before coating removal. Media blasting removed the failing finish; sanding followed to refine the exposed surface. The pale logs in these photographs belong to that preparation stage. They are neither the intended final color nor proof of a completed protective finish.
02 / During · Gable
03 / During · Entry
Good preparation is about the substrate the next coating must hold onto. It is not an invitation to erase the grain. Equipment settings, abrasive choice, cleaning, drying, and application conditions require site-specific decisions; the photographs do not document numerical settings or moisture readings.
A new color is the visible change.
The prepared surface is what comes first.
03 / The finish system
Barn Gray. Stone. Distinct jobs.
The owner confirmed the following products for this project. Color photographs show appearance, not product chemistry: lighting, exposure, and screens all affect the result you see. Manufacturer links explain each material’s role; they are technical guidance, not independent verification of this job.
Lifeline Ultra-2
This waterborne, semi-transparent stain provides the gray color while allowing wood character to remain visible. Perma-Chink’s Ultra-2 guidance covers surface preparation and backbrushing. Our staining work treats those steps as part of the finish, not an optional preface.
Lifeline Advance
Lifeline Advance is the clear protective companion topcoat, not a substitute for the colored stain beneath it. Its use is owner-confirmed here; the sheen is not specified in this project record.
Perma-Chink
The light joint bands are Stone #211 flexible acrylic chinking. The manufacturer’s chinking guidance explains backing and bond-breaker considerations that allow joints to accommodate movement. Photographs cannot verify concealed backing details. Learn more about our chinking and joint-sealing work.
04 / After the color & chinking
The same home, read differently.
Barn Gray coordinates the log surfaces; Stone brings a lighter rhythm between them. The contrast makes the individual courses legible without hiding their texture. These are work-stage after photographs: a masked door and a ladder remain visible. They document the restored appearance, not a staged final handover.
04 / After · Entry
05 / After · Gable
05 / Living with the finish
Keep watching the details.
After restoration, inspect the coating and joints regularly, especially exposed elevations, log ends, checks, and transitions around openings. Watch for new peeling, changing color, or separation along chinking edges. Record changes with photographs and seek an assessment before adding another product. Cleaning and recoating should follow the installed system’s current instructions; this project does not establish a fixed maintenance interval or finish lifetime.


